Critical Mission Fuel Transfer System integrates the following into one system:

• Critical Mission System Control
• Multiple Main Storage Tanks
• Multiple Day Tanks and Belly Tanks
• Multiple Commercial Boiler Systems
• Fuel Polishing Systems
• Duplex Pump Control Systems
• Above and below Ground Pipe Leak Detection
• Integrated Building Management System

Critical Mission System Controller:

• Dual (or Single) Power Source Feed
• Auto-Switch on Dual Power Source
• Single point connection to Fuel System Equipment
• Control Power Transformer and Circuit Breakers
• Pump Motor Starters with Manual Disconnect and Overload Protection
• State-Of-The-Art Programmable Logic Controller (PLC)
• State-Of-The-Art Operator Interface Terminal (OIT) Touchscreen
• Monitors and Controls All System Components.
• * Leak and Level Devices
• * Flow Indicators and Sensors
• * Motor Starters and Overloads
• * Water and Pressure Switches
• * Pump Motors and Valves
• Integrates with the Building Management System (BMS)
• Utilizes Three Modes of Operations:
• * Fully Automatic Mode
• * Supervise the Manual Mode
• * Emergency Manual Mode.
• Allows Maintenance of Equipment Without Equipment Shutdown (CRITICAL MISSION)

Multiple Main Storage Tanks Leak and Level Monitoring:

• Automatic Polished Fuel
• Product Level In US Gallons.
• Product Level In Inches.
• Product Level In Percent Of Full Tank Capacity.
• Overfill Protection.
• High Level Alarms.
• High Level Warnings.
• Low Level Warnings.
• Low Level Alarms.
• Optional Remote Fill Station Enunciation.
• Interstitial (Double Wall Tank) Leak Detection Sensors.
• Piping Sump Leak Detection Sensors.
• Main Tank Level Balancing (With Multiple Tanks)

Multiple Day Tanks and Belly Tanks:

• Automatic Polished Fuel.
• Monitoring the Volume of the Day Tanks.
• Overfill Protection.
• High Level Alarms.
• High Level Warnings.
• Normal Product Levels. (Maintained by Integrated Pump Controls)
• Low Level Warnings.
• Low Level Alarms.
• Interstitial (Double Wall Tank) Leak Detection Sensors.
• Piping Sump Leak Detection Sensors.
• Integrates with Mechanical Overfill Valves.
• Pre-assembled Valve Box Enclosure integrates with:
• * Flow Switch
• * Visual Flow Indicator
• * Critical Mission Fuel Supply Solenoid Valve
• * Pressure Gauge
• * Lockable Manual Bypass Valve
• * Equipment Strainer
• Pre-assembled Return Pump System In Enclosure.
• Both Valve Box In Return Pump Can Be Incorporated in the Same Enclosure As One Assembly

Multiple Commercial Boiler Systems:

• Monitors the Boilers for Automatic Fuel Deliveries.
• Automatically Polishes the Fuel Upon Delivery.
• Verifies Flow and Maintains the Pressure As Required.

Fuel Polishing Systems: (SAE J1488) 

• Able to Change Filter Elements While This System Is in Operation. (MISSION-CRITICAL)
• Automatically Polishes the Fuel on a Scheduled Basis.
• Polishes the Fuel from the Main Storage Tanks.
• Polishes the Fuel from the Days Storage Tanks.
• Provides Maximum Fuel System Reliability by Removing Entrained Moisture and Accumulated Contaminants.
• Keeps Fuel Dry, Promoting Bacteria Free Environment and Preventing Contaminant Build up.
• Monitors System Pressure and Differential Pressure Across the Elements.
• High Water Sensors.
• Enclosure Leak Detection Sensor.

Duplex Pump Control Systems:

• Automatic pump alternation sequencing.
• Lead Lag Pump Controls. (MISSION-CRITICAL)
• Automatic Pump Alternation Sequence.
• Enclosure Leak Detection Sensor.
• Monitored Pump Performance.
• Integrated Flow Switches.

Above and below Ground Pipe Leak Detection:

• Double Wall Pipe.
• Monitors All Piping Sumps and System Enclosures.

Integrated Building Management System:

• Integrates with Building Management systems (BMS) Ethernet, RS232, RS422, Modbus compatible. (OPTIONAL)
• Available 4 to 20 mA Output Of Fuel Levels to the BMS System
• Available 8 Alarms Dry Contacts For Critical System Alarm Conditions.
• Additional Operator Interface Terminal (OIT) Located in a Remote Location (OPTIONAL)

System Benefits:

• One Incoming Power Source for Complete System.
• Integrates All Equipment into One System Including Single wall or Double Wall Pipe.
• These Integrated Systems Eliminate the Hassle of Integrating Multiple Pieces of Equipment, Such as Emergency Generators, a Tank Level Controls, Pump Controls, Take Inventory Controls, And Leak Detection Systems.
• Pre-assembled Date Tank Valve Assemblies, Return Pump Assemblies, Filtration System Assembly, Main Tank Valve Assemblies, Enabling a Simple Install. In Most Cases the System Can Be Installed By Hooking up a Single wall or Double Wall Pipe From Point-To-Point.
• The System Electrical Comes with Point-To-Point Wiring Diagrams Enabling Hassle free Installations.
• The System Reports All Conditions Back to the Building Management System.
• The System Is Purchased and Maintained by a Single Source.
• Integrates up to Four Main Storage Tanks and up to eight Day Tank Storage Tanks.

Specifications:

• All Equipment Is Housed in NEMA 4x stainless steel 304 enclosures. (Carbon Steel Powder Coated Available).
• All Equipment Piping is Stainless Steel 304. Eliminates All Paint for Pipe Valves and Fittings. Hassle free Maintenance For the Life of the Equipment.
• All Leak And Level Sensors And Level Transmitters Are Made of Stainless Steel Construction.
• Available in Single Phase or Three-Phase (50 or 60 Hz)
• Available in Multiple Voltages.