Eco Filtration Monitor – Controller
Eco Filtration Monitor (EFM) is a compact controller designed specifically for fuel polishing systems. Also the EFM has 16 programmable set points.
eco filtration monitor
PureFuels – Eco Filtration Monitor / Controller PureFuels Eco Filtration Monitor (EFM) is a compact controller designed specifically for fuel polishing systems. Also the EFM has 16 programmable set points. With each set-point, it can be programmed for either one or up to seven days a week. The EFM monitors the main storage tank for …
ISO 4406 12/9/6
Diesel Fuel Cleanliness Standards The awareness of fuel cleanliness in diesel engines is not new – in fact, it was first documented as early as 1931 with the introduction of the Caterpillar Diesel Sixty Tractor. The fuel injection pressure developed by the engine was only 1,250 psi, yet the caption from an article of the …
PureFuel Product Line
PureFuels/GeoDry Fuel Mission Critical Polishing Equipment What is PureFuels? PureFuels is a Trade Name For Lakeside’s Mission Critical Fuel Polishing Systems Ultra Clean Diesel to ISO 4406 12/9/6 Results in a Single Pass Uses Proprietary Filter Cartridges to Purify Fuels and Oils to Equal to and Less Than ISO 4406 12/9/6Â Flow Rates 2 GPM …
PFF-100G-3M ISO 16889 12/9/6
Spare Element #7645510 PFF-100G-3M for PFHF-150NPT-100G-3M ISO 12/9/6 Housing Diesel fuel particulate filter for dispensing or polishing filtration applications up to 100 GPM Proprietary PureFuels element technology which exceed SAE J1488 requirements Exceeds ISO 16889. Using APC calibrated per ISO 11171. Fuel cleanliness of 12/9/6
PFHF-150NPT-100G-3M ISO 12/9/6
Diesel fuel particulate filter for dispensing or polishing filtration applications up to 100 GPM All-aluminum filter housing is fully compatible with diesel and biodiesel blends Proprietary PureFuels element technology which exceed SAE J1488 requirements Exceeds ISO 16889. Using APC calibrated per ISO 11171. Fuel cleanliness of 12/9/6 Differential Pressure Gauge with a green or red display …
TAN (ASTM D664-18)
Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration ASTM D664-18 1. Scope 1.1 This test method covers procedures for the determination of acidic constituents in petroleum products, lubricants, biodiesel, and blends of biodiesel. 1.1.1 Test Method A—For petroleum products and lubricants soluble or nearly soluble in mixtures of toluene and propan-2-ol. …
GDF-25G-1M-SAEJ1488
GeoDry Mission Critical Coalescer Filter Cartridge rated at 25 GPM is tested to meet SAE J1488 2010 Edition for Water, Free and Emulsified, and Particle Removal.
PP2-GDHF-25G-1M-SAEJ1488-1PH-115
Compact fuel polishing coalescing system designed for critical applications and specifications SAEJ 1488 / ISO 12/9/6 utilizing patented GeoDry and PureFuel technologies.
